Does this email look funky or not formatted correctly? View it in your browser.

July 19, 2011

Divot filling vs replacement

Neil Radatz, CGCS, Hawk's Landing Country Club, Verona, WI:

"Over the last few weeks we have gone through a lot of divot mix for the fairways and tees. This is a great thing and your effort is much appreciated, but I also feel that there are many divots that can be very easily replaced instead of filled with divot mix. In the photos below I took three shots into a green; the left and middle full shot with a big divot, while the right side just a scalp with no divot taken.

After one week the replaced divot is completely rooted down and the filled divot has just germinated. It would take most likely another seven days for complete fill in. This shows that if you can replace your divots, do so. If there is not enough sod to fill the void then fill with the divot mix."



Two divots taken and a scalp. July 8


The center divot is replaced;
the other two filled. July 8


Notice rooting of replaced divot. July 11


After one week the replaced divot is completely rooted down while the filled divot has just germinated. July 15

Visit Neil's blog at http://hawkslandinggreens.blogspot.com/

Did you know, Vol 1: Mower adjustment

Justin Ruiz, CGCS, Indian Summer Golf & Country Club, Olympia, WA:

"Did you know that the mowing equipment we use to cut greens is adjusted to thousandths of an inch?

Yes, the mowing equipment used on the greens is adjusted with a tool called an Accu-Gage. This tool measures the distance from the bedknife to the bottom of the rollers in thousandths of an inch. For example, the greens are currently cut at 115/1000". In the past, to get the greens speeds fast for tournament play, the greens have been cut as low as 90/1000".

When the mechanics set the greens mowers up, they have many variables that apply to their adjustments. They must maintain a 5 degree angle on the face of the bed knife for the mower to properly stand the leaf blade upright for cutting. They must obtain the proper clearance between bedknife and reel at .002" to allow for heat expansion under operation. And finally, they must maintain a parallel relationship between the reel and the rollers to ensure an even cut across the width of the mower and to avoid uneven wear of the reel causing a cone shape.

With that being said it is imperative that the mowers are checked daily for adjustment. Quality of cut and proper height of cut can be compromised by loading and unloading the mower. Even a small particle of sand can cause havoc on the cutting integrity.


"So in the case of dull mower damage, the plant will expend it's energy trying to produce more top growth to ensure the efficient production of energy made from photosynthesis..."

Now, the importance of proper adjustments made daily to the mowing equipment also affects the turf as well. Turf when mowed with a sharp mower is much more healthy. The plant has a better opportunity to heal and a better ability to sustain the damage caused by mowing. As for a dull mower, it will leave the leaf blade shreaded. The plant uses energy made from essential nutrients to repair the damage. All grasses prefers the production of leaves over roots. So in the case of dull mower damage, the plant will expend it's energy trying to produce more top growth to ensure the efficient production of energy made from photosynthesis. "Shoots before Roots"

What does that mean? The plant will then use more resources to make this process happen. The plant will require more water, more fertilizer and more plant protectants to outgrow any stress that the plant is under.

So, back to the important role of our equipment manager. The equipment manager is critical in the overall health of the golf course. In turn the health of the golf course will dictate nutrient and water needs. We rely on their precise and persistent adjustments made everyday to the mowing equipment.

Probably a little more than you needed to know about mowing equipment, but none the less, it is an integral part of our golf course maintenance.

Visit Justin's blog at http://indiansummergolf.blogspot.com.

Groovin' with the Graden

Kevin Breen, Lahontan Golf Club, Truckee, CA:

"There are few things that I enjoy more than a smooth consistent surface. When all the small imperfections are removed it just looks, and plays wonderfully, and the best piece of equipment that currently exists is the Graden.

This machine is not for the timid because it gets straight to the job of removing material, leaving heaping mounds of grass and debris in its formidable wake of renovation. Only the strong plants survive, and isn't that what we want anyway? Sand is added in behind the organic matter removal, assuring the firm, smooth surface that is perfect for golf. BEAUTIFUL!! All tees and approaches were done last week.


Visit Kevin's blog at http://lahontanmaintenance.blogspot.com

TDR300 Field Scout Meter

Rick Tegtmeier, CGCS, Des Moines Golf & Country Club, West Des Moines, IA:

"This summer we have utilized a couple of new soil moisture meters called a TDR 300 Field Scout Meter. Perhaps you have seen some of our staff members walking around putting greens testing the greens with the meters. These meters give us a very accurate, real time reading as to what the moisture is in the green at that particular time of day. We now know if our irrigation system is working properly, or if we have over watered or under watered a area. We also are learning to keep putting greens drier, which really allows for much better playing conditions. We plan to purchase a few more meters in the future and you will see more of us out there testing the soil."



Visit Rick's blog at http://dmgcc.blogspot.com

More STYLIN'!

We offered to help you put your best foot forward by customizing a blog theme or email header for you. Dave and Matt Gourlay answered the call and are now sporting custom email headers:





The offer is still open, so send us some course photos (at least 1000 pixels wide), a headshot or two of yourself and a club logo... and we'll take it from there! No charge, of course, for TurfNet members only. Yet another advantage of being a TurfNet member!

About our Blog Aggregator: Many superintendents are now hosting private blogs to better communicate with their golfers and/or members. Beyond local weather and course conditions, there is a great deal of information about projects, methodologies and techniques that would be of value to other superintendents — hence our Turf Blog Aggregator. As every blogger struggles occasionally with content, we also include posts intended to educate golfers about turf maintenance for others to use as a template for their own blogs.

TurfNet members: Want to share something from your blog? Send us the link.
Turf Blog Aggregator(TM) is a trademark of Turnstile Media Group.