Jump to content

James Roland

Distributor or Dealer
  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Par

About James Roland

  • Birthday February 21

Profile Information

  • Club/Course/Company
    Michigan Turf Equipment
  • Location
    Ann Arbor MI

Contact Methods

  • Website URL

Recent Profile Visitors

2,126 profile views
  1. With the exclusive Quick Attach System (QAS) offering tool-free, quick attachment change outs and over 25 valuable attachments, the Sand Pro 3040 is a versatile utility vehicle with as many uses outside the bunker as in it. The Toro Sand Pro keeps bunkers in tournament condition every day. Engine: Vanguard®, V-twin cylinder, 4-cycle, OHV, air-cooled, gas engine with cast iron sleeves. 16 hp (11.9 kW) at 3600 rpm. Traction Drive: Direct driven hydrostatic variable displacement piston pump to 3 hydraulic motors for 3WD. Ground Speed: Infinitely variable 0-10 mph (16 km/h) forward; 4.3 mph (6.9 km/h) reverse. Control/Gauges: Hand operated choke, throttle, and hydraulic control for raising/lowering with float. Foot pedal controls traction forward/reverse speed. Rear hydraulic lift and lower controls.Gauges: hour meter. Options Include: Lights, Rear tooth rake & Spring Rake Excellent condition machine for a variety of applications. HOURS: 2075

    Ann Arbor, Michigan


  2. There’s never been a better time to make the switch to an all-electric utility vehicle. The Gator TE can run all day on a single overnight charge*, and haul up to 500-lb. (227 kg)with the same Deluxe Cargo Box you’ll find on the TX and TH. All while giving you the advantage of zero emissions and zero fuel consumption. Plus it’s so quiet, you won’t believe your ears. Comes standard with a UL approved charger that automatically shuts off after reaching full charge. Motor: 6.0 hp (4.6 kW) separately excited D.C. motor (30 minute S2 rating) Electrical System: 48 volt system – Eight 6 volt Trojan T-145 Batteries (Extended Run) Maximum Speed: 0-15 mph (24.1 km/h) PAYLOAD/TOWING CAPACITY: 900 lb. (409 kg) / 600 lb. (273 kg) Ground Clearance: 7.3 in. (185 mm) under Foot Platform Estimated Full Recharge Time: 12 hours – T-145 Batteries Dump Box: 16.4 cubic foot (.46 cu. m) capacity reinforced box includes a gas assist for easier lifting and dumping, pick-up style tailgate, 20 integrated tie-down points, and removable side panels and tailgate for flatbed operation. Includes: Heavy-duty front bumper & brushguard, Lights, 1″ Receiver Hitch & Manual Dump Box. Hours: 785

    Ann Arbor, Michigan


  3. The legendary Toro® Greensmaster® 1600 has a cutting width of 26″. The 1600 boast convenient operator controls, precision cut, and an ergonomic loop handle design to reduce operator fatigue and increase productivity. This unit offer a number of maintenance features to ensure a long and productive life, including quick access to all service points for routine maintenance, and a forward weight bias which balances the machine and sets an industry standard for straight line tracking. This also ensures a pristine cut regardless of operator influence. Heavy-duty, 4.3 hp (3.2 kW) Subaru® Industrial engine for optimal power. 26-inch (66 cm) width of cut. Wider mowing swath for increased productivity. Standard 8-blade reel for mowing aprons, tees, athletic fields and other surrounding formal turf areas. Mowing speed: 1.5 mph (2.4 km/h) to 3.3 mph (5.3 km/h). Transport speed (maximum): 5.0 mph (8.0 km/h) with transport tires installed. Height of Cut Range: .125″-1.25″ (3.2 -31.8 mm) Options Include: Broomer Attachment w/On-Off Feature, LED Light Kit & Transport Wheels. One(1) mower remaining Hours: 1485(pictured)

    Ann Arbor, Michigan


  4. The legendary Toro® Greensmaster® 800 Fixed-Head series has a cutting width range of 18″. All models in the line boast convenient operator controls, precision cut, and an ergonomic loop handle design to reduce operator fatigue and increase productivity. These units offer a number of maintenance features to ensure a long and productive life, including quick access to all service points for routine maintenance, and a forward weight bias which balances the machine and sets an industry standard for straight line tracking. This also ensures a pristine cut regardless of operator influence. 4.3 HP (3.2 kw) Subaru® gas engine Dual Cast Aluminum Traction Drums with A-Section V-Belts Ground Speed – Mowing: 1.5-3.3 mph (2.4-5.3 km/h) Transport: 0-5 mph (0-8 km/h). 14-Blade DPA Reel – Fourteen blade reels are designed for extremely fine greens mowing at the lowest heights of cut. Ergonomic Loop Handle Design – Ergonomic handles make mowing comfortable for a wide range of operators. The 3-position pull pin height adjustment for the handle allows operator to quickly adjust handle for their comfort without a technician’s assistance. Light Kit – For Early Morning or Late Evening mowing Two(2) Mowers available Hours: 1296, 1535

    Ann Arbor, Michigan


  5. 35.5 hp (26.5 kw), 4-Cylinder Kubota® Diesel Engine – NO TIER 4! Controls include: Single foot-operated traction pedal, foot actuated mow speed limiter, foot actuated service and parking brake. Hand-operated key ignition switch, throttle, cutting unit raise/lower joystick, cutting unit engage switch, and headlight switch all positioned on right hand pivoting control console. 3″ diameter, deep groove Wiehle front roller. 3.0″ solid diameter rear roller. 5-plex, hydraulically driven, 11 Bladed DPA Reels units with adjustable rear weight transfer spring. 100″ Width of Cut Height of Cut range: 0.25″ – 1″ (6.4-25.4 mm) standard kit. Options include: Deluxe Suspension Seat & Lights Unit is in Outstanding condition and is ready to mow! Hours: 1792

    Ann Arbor, Michigan


  6. You can’t get more hauling capacity, versatility, or bang for your utility vehicle buck than you can with a Toro Heavy-Duty Workman. With an I-beam axle that’s seven times stronger than a tubular design, a bed that hauls up to 3,352 pounds (1,520 kg), and an electronic fuel-injected engine that makes every gallon go farther, it’s the highest performing utility vehicle on the market today. Engine: Kubota® 972 EFI 32.5 hp (24.2 kW) gas engine Total Capacity: Up to 3,351 lbs. (1,520 kg) Towing Capacity of 3,500 lbs. (1,587 kg) Disc Brakes: 4 wheel hydraulic disc brakes provide greater stopping power and easier servicing than traditional drum brakes. Ride Quality: Independent front suspension consisting of two double A-frames with opposing dual coil springs and dual shock absorbers provides 5.75 in. (14.6 cm) of front suspension travel. Rear suspension design consists of a DeDion rear axle and dual independent leaf springs and shock absorbers to provide 3 in. (7.6 cm) of rear travel. Versatility: The Workman® can perform a variety of work tasks beyond hauling and towing with attachments such as a 200 Gallon (757 Litre) Sprayer, Vicon® Spreader, 1/3 Vertical Platform Lift, Patriot® Aerial Lift and Topdressers. DeDion Rear Axle: The DeDion rear axle design is an automotive technology which isolates the engine, transmission and main frame from all load forces, eliminating stress to these main components. Options: Canopy Top HOURS: 2157

    Ann Arbor, Michigan


  7. 2011 Toro HDX – D 4WD Workman utility cart B&S Daihatsu® 950D, 3-cylinder, inline vertical, 4-cycle, liquid cooled, counterbalanced diesel engine 24 hp (17 9 kw); governed to a maximum speed of 3600 rpm Mechanical centrifugal governor 58 0 cu in (950 cc) displacement. Instrumentation: Fuel and coolant temperature gauges, Hour meter, Oil pressure, glow plug and battery charge indicator lights Tachometer and speedometer. Four Wheel Drive – The Automatic on Demand four wheel drive feature, on this vehicle does not require operator activation. The front wheel drive is not engaged (no power delivered to front wheels) until the rear wheels begin to lose traction. The bidirectional clutch senses the rear wheels slipping, engages the front wheel drive, and delivers power to the front wheels. Rear PTO for driving the pump for the sprayer. Hand Throttle to maintain constant speed. 4 Post ROPS Hours: 2062 2014 Toro Multi Pro® WM – 200-Gallon Sprayer 200 Gallon Chemical Tank – Elliptical tank design prevents chemicals from building up in ‘dead spots’. Square tanks with interior ledges can lead to misapplication or residual chemicals left in the tank after the spray application. The tank incoporates a 16″ side-offset fill well for easy access when loading chemicals. Durable polyethylene material won’t crack, dent, rust, chip or peel. Four, 30-degree, side-mounted, agitation nozzles continuously ‘roll’ the tanks contents. Quick Find™ Console – The Quick Find™ Console helps the operator intuitively locate boom and actuator switches with the palm of their hand and places command of all key vehicle and sprayer systems at the operator’s fingertips for ease-of-use and improved control. The Info Center display and the analog pressure gauge, which are convieniently located just above the boom section and actuator switches. Six Diaphragm Pump – An industry exclusive! This oversized pump satisfies the highest spray rates while simultaneously supplying aggressive agitation flow. The self-priming, positive displacement design means the pump can be run dry without damage. CLEANLOAD EDUCTOR KIT – This on-board mixing station allows rapid and safe loading of any chemical without the need to first mix into a slurry Incorporates a built-in bottle wash nozzle and has an optional suction lance to pull in powdered or liquid products from their container. FRESH WATER RINSE KIT – Simplifies and automates the triple-rinse process, saving hours and hours of clean up time. PIVOTING ELECTRIC HOSE REEL KIT – 150’ (45.7 m) of hose for hand or walk spraying applications. Convenient electric powered rewind. PRO FOAM MARKING KIT – Foam dollops ensure accurate parallel path tracking. Select foam independently or both simultaneously. Hydraulic Lift/Lower of Truss Styled Boom. Controls – Spray pump control switch, agitator jet switch, rate switch, individual boom On/Off switches, boom actuator switches, indicator lights on pump, agitation and boom switches, throttle lock. Fresh Water Tank for operator Includes Storage Stands if you want to remove the sprayer from the cart.

    Ann Arbor, Michigan


  8. It’s your land, your little plot of heaven. You worked hard for it, and you fully expect to work hard on it. Now, all you need is the right tractor. The Massey Ferguson® 1726E Series compact tractor is your tractor. Economical and versatile, it’s the perfect partner for virtually any chore or project. The simple, no-nonsense design comes in a standard 4WD platform, and a 3-range hydrostatic transmission. This is an affordable, practical tractor that won’t sacrifice performance. Engine: 24.0 Rated HP Shibaura 3-Cylinder Liquid-Cooled Diesel 1.49 L In-Direct Injection System PTO: 20 HP @ 2600 RPM – Hydrostatic Transmission: Hydrostatic: 3 Non-Synchronized Ranges PTO: HST: Rear – 540 RPM Transmission Driven PTO with Overrunning Clutch 3-Point Hitch Cat I with Position Control INSTRUMENTS: • Tachometer and Hour Meter • Temperature Warning Light • RPM, Fuel and Hour Meter Gauges • Warning Lights: High Beam Indicator, Engine Oil Pressure, PTO Engagement, Battery Charge (alt) Indicator, Glow Plug Indicator and Flasher Indicators. Standard Features Include: Steel Tilt-up Hood Adjustable Spring Suspension Seat 2 Post Folding ROPS and Retractable Seat Belt Turn Signals, Flashers, Tail Lights and SMV Emblem 2 Headlights L105E Loader Specifications: Lift Capacity at Pivot Pins to Full Height: 1450 lbs One Piece Main Frame with Tapered Arms and Single Cross Member Quick Attach Loader Frame Mount with Pin Lock & Built-in Stands Skid Steer or Pin-Type Implement Attachments Grille Guard Standard HOURS: 30

    Ann Arbor, Michigan


  9. For the Safest and Most Efficient Transport of Greens Mowers Greens Mower is supported on the axel & front roller Cantilever design allows for easy loading and unloading of the mower Big floatation tires allows operator to get close to the greens complex The TRANSPRO 80 is intended for use with Greensmaster 800, 1000, 1600, 2000, 2600, Flex 18/21/1800/2100 and eFlex 1800/2100 Walk Greensmasters. Store your walker on the trailer and make getting going in the morning quick and easy. Three(3) Trailers currently available Includes: Bogue Wheels for Rail Kit Trailers

    Ann Arbor, Michigan


  10. 57 HP Yanmar turbo-charged diesel engine delivers exceptional power and torque in tough mowing conditions, while still ensuring fuel economy. NO TIER 4 EMISSIONS ON THIS MOWER! Almost 11 feet of finishing mower width lets you cover large, open areas faster. The 1600 Wide-Area Mower boast a finishing mower quality cut, 68-acre-a-day capacity and unmatched reliability. The 1600 Turbo is surprisingly flexible—able to maneuver down paths as narrow as 84-inches wide. Also mow with just one wing and the center deck, or just the center deck alone. 1600’s wing decks are able to mow at a 45-degree upward angle and a 20-degree downward angle. Full time or on-demand 4-wheel drive provides excellent traction. Foot-activated differential locks can add traction for hillsides and slippery conditions. Deluxe Air Ride Seat features a heavy-duty air suspension with fore / aft adjustment, ergonomic comfort cushions, adjustable lumbar support and arm rests. Semi-pneumatic caster tires for mower decks never need air maintenance, nor will they become flat when punctured. High/Low range lets you mow and transport between mowing sites at speeds up to 14.4 mph. Wide-discharge deck opening provides clipping dispersal for an excellent appearance. HOURS: 2436

    Ann Arbor, Michigan


  11. The Reelmaster® 5010-H is the industry’s first and only reel mower with a true hybrid drive system. The Reelmaster 5010-H utilizes a Kubota 24.8 hp diesel engine in concert with an in-line motor generator and a self-recharging 48-volt battery pack to provide seamless power to the vehicle and cutting units. The combination of these two power sources comprises Toro’s patented hybrid power delivery system called PowerMatch™. PowerMatch enables the Reelmaster 5010-H to match the power generated to the power required for all cutting conditions. The result is the availability of over 40 horsepower, but only when cutting conditions require it, which saves on average 20% fuel usage, improving operating costs, and the vehicle’s carbon footprint. Tier 4 compliant Kubota® 3-cylinder, liquid-cooled, diesel engine. 24.8 hp (18.5 kW) along with Four 12V Absorbed Glass Mat (AGM), sealed, maintenance-free lead acid batteries. Drive: CrossTrax™ AWD Traction Drive Cutting Width & Reel Configuration: 100″ (2.5m) Cutting Width with 11 Bladed, DPA 7″ Diameter Reels & includes Power Rear Roller Brushes. Versatility: The Reelmaster 5010-H has a Plug and Play feature that allows it to accept 5-inch or 7-inch diameter DPA cutting units. Simply plug in the cutting unit and motors of your choice and the machine automatically make all the necessary adjustments. The 5010-H can be equipped with 5″ or 7″ reels, in either 8 or 11 blade configurations. Precision Control: The Reelmaster 5010-H’s InfoCenter display will actually make maintenance and diagnostics quicker and easier for technicians. The on-board LCD display provides system information alerts, service reminders, diagnostics, fault codes and vehicle and cutting unit adjustments that are easy to see and understand. Precisely control reel speed and clip rate, monitor reel performance and view reel diagnostics with the on-board InfoCenter. EdgeSeries™ Reels with Forward-Swept design has an improved helix and blade angle, offering a very precise cut for the full width of the bedknife-to-reel contact. Worry Free: Removing the hydraulic cutting mowers and replacing them with electric motors on the Reelmaster 5010-H resulted in over 100 fewer leak points than a conventional fairway mower. Options: CrossTrax™ AWD, Canopy with Cool-Top Fan, Power Rear Roller Brushes. This unit DOES NOT have all the Tier 4 Emission Controls. It is the direction of Future Turf Equipment pieces! Don’t miss your chance at this LOW Hour Mower that is the Future of Turf Equipment. HOURS: Key on: 1212 Hours, Engine Running: 1203, Reels Spinning: 759

    Ann Arbor, Michigan


  12. Kubota 4-cylinder, liquid cooled, diesel engine. 35.5 hp @ 3000 rpm. 5-plex, hydraulically driven, balanced cutting units with adjustable rear weight transfer spring. Cutting units feature quick disconnect for removal/installation. Five – 22″ wide, 5″ diameter 8 blade DPA cutting units. Options include: Air-Ride Suspension Seat, Canopy w/Cool-Top Fan, Power Rear Roller Brushes & Lights. Width of cut – 100″ Height of Cut range 0.25″ – 1.0″. Up to 2.0″ with high height of cut kit. Dual Precision Adjustment bedknife to reel. 3″ diameter, deep groove Wiehle front roller with scrapers. 3.0″ solid diameter rear roller Hours: 2526

    Ann Arbor, Michigan


  13. The all new Greensmaster® TriFlex™ Hybrid Mowers were designed to take precision cutting on a hybrid mower to a completely new level. Adopting the proven Flex suspension, the cutting units float freely over contours and undulations of the green resulting in a superior quality of cut and aftercut appearance. The all-electric reel drive eliminates hydraulic leak points and delivers ample horsepower to handle a broad range of cutting applications. The TriFlex™ Hybrid models address customer’s environmental and financial needs with a combination of features that save energy, enhance productivity, extend a product’s versatility, and enhance turf health. More Power – 21 hp (13.4 kw) Briggs & Stratton® Engine All-Electric Reel Drive – In addition to eliminating hydraulic leaks, each reel motor has a nominal 1.5 horsepower (1.1 kW) that can increase up to 3.0 hp (2.2 kW) during peak load periods. Proven Flex Suspension (Patented) – Superior contour following capability utilizes an integrated “Flex” linkage system to allow cutting units to pivot around the center of the front roller to master undulations and prevent side-to-side scrubbing of the putting surface. Patented DPA Cutting Units – Precision manufactured cutting units with minimal adjustments and the proven ability to maintain adjustment for longer periods of time provide superior cutting performance. Tool-Free, Quick-Change Cutting Units – A single operator can go from cutting Greens at 1/8″ (3.2 mm) to cutting a Fairway at 3/4″ (19 mm) in just a few minutes. Faster Transport Speeds – Ten miles per hour (16.1 km/h) transport speeds will allow you to stay ahead of golfers and get more greens cut in a shorter time. Exclusive Lift-Gate Footrest – Easy access to the center cutting unit facilitates routine maintenance and repairs, simplifies adjustments, and eliminates the need to put the traction unit on a lift. 11 Bladed DPA Reels – Smooth Front Rollers, Adjustable Reel Speed Control & On-Board Backlapping. Options Include: LED Lights, InfoCenter Diagnostics Display Hours: Engine Running: 1684 Reels Mowing: 700

    Ann Arbor, Michigan


  • Create New...