Turf Equipment Technician

By Wild Dunes Resort, 8 hours ago - updated 8 hours ago - Isle of Palms, South Carolina

Summary:  The Equipment technician is expected to assist with the inspection, diagnosis, repair and maintenance all pieces of turf management equipment to the highest degree of dependability and performance, with the emphasis on precise quality of cut. The Equipment technician shall strive to provide exceptional service to both internal and external guests at all times. S/he will be responsible for exemplifying the Wild Dunes Resort Culture as well as promoting Wild Dunes Resort as both the Destination and Employer of Choice! Essential Job Functions: ·         Inspects, diagnoses, repairs and maintains all pieces of turf management equipment to the highest degree of dependability and performance with the emphasis on precise quality of cut. ·         Assists with the appropriate scheduling of preventative maintenance, prioritized repairs and reel set up ·         Troubleshoots all equipment ·         Strict adherence to precision reel setup procedures ·         Maintains a clean, well-organized shop with safety the highest of priorities ·         Assists with golf course special projects ·         Complies with all Wild Dunes Resort’s policies, procedures and safety regulations ·         Maintains a strong knowledge of emergency procedures ·         Attends appropriate resort, division and department meetings ·         Maintains a strong knowledge of golf maintenance trends ·         Learns to operate all pieces of equipment ·         Provides general resort information for guests ·         Offers warm and sincere welcome/farewell for all guests of Wild Dunes Resort including use of guest name when possible & good eye contact with each guest ·         Interacts with resort staff in a professional manner, assisting other departments when necessary ·         Always maintains a professional demeanor and attitude ·         Communicates all pertinent information to the golf maintenance team ·         Maintains a professional appearance. Follows all Wild Dunes Resort dress code standards ·         Remains alert, courteous and helpful to the guests and colleagues at all times Colleague is held accountable for all duties of this job and other duties as assigned. Qualifications - External Experience & Education: ·         High school education or equivalent required ·         Minimum of two years of appropriate schooling, training or experience required ·         Minimum of two (2) years in a similar position preferred Job Requirements: ·         Must be a United States citizen or possess a valid work permit ·         Must have a valid driver’s license and meet company driving standards ·         Must be able to read, write and speak English ·         Must have a strong technical gasoline and diesel engine background ·         Excellent equipment operation skills ·         Must have required tools of the trade ·         Must have excellent mechanical understanding and ability ·         Must have excellent leadership skills ·         Must have exceptional detail in follow-up ·         Must be able to work well under pressure ·         Must be able to accurately follow instructions, both verbal and written ·         Must possesses excellent communication skills, both verbal and written ·         Must be able to effectively teach and train staff ·         Must have excellent listening skills ·         Must always ensure a teamwork environment ·         Ability to work a flexible schedule that may include evenings, weekends and holidays ·         Must have the ability to deal effectively and interact well with the guests and associates ·         Must have the ability to resolve problems/conflicts in a diplomatic and tactful manner Employees who are hired at Wild Dunes Resort will be verified through the federal E-Verify system. Working Conditions: ·         Must be able to work outdoors in a variety of weather conditions (rain, wind, cold, sun & heat) ·         Must be able to stand & walk throughout the day, occasionally on uneven surfaces ·         Must be able to frequently lift, push, pull & carry up to 50 lbs, occasionally up to 75 lbs. with assistance ·         Must be able to bend, squat, crawl, kneel & twist on a frequent basis, sometimes for prolonged periods ·         Must be able to perform simple grasping, squeezing, fine manipulation and repetitive hand & arm movements frequently; overhead reaching occasionally.  ·         Must routinely work with solvents ·         Must occasionally work with solvents and in an area with exposure to noise and dust.

By LPGA International Golf Club, 9 hours ago - Daytona Beach, Florida

As a Golf Course Equipment Mechanic, you will play a critical role in ensuring the smooth operation of all golf course equipment to support the daily maintenance and upkeep of the course. Your responsibilities will include inspecting, diagnosing, repairing, and maintaining various types of equipment used on the golf course, such as mowers, tractors, and utility vehicles. You will need to possess a strong understanding of engine mechanics, hydraulic systems, and electrical components to effectively troubleshoot and resolve equipment issues. Additionally, you will be responsible for performing routine maintenance tasks, such as oil changes, blade sharpening, and belt replacements, to keep the equipment in optimal working condition. In this role, attention to detail is crucial to identify potential problems before they escalate, ensuring that equipment downtime is minimized. You will work closely with the golf course superintendent and other team members to prioritize repairs based on operational needs. The ability to work independently and prioritize tasks efficiently will be key to succeeding in this role.   Job duties also involve sourcing and idnetifying replacement parts, maintaining accurate records of repairs and maintenance activities, and adhering to safety protocols and regulations while performing equipment repairs. The Golf Course Equipment Mechanic plays a vital role in contributing to the overall appearance and conditions of the golf course. Certification or training in equipment mechanics preferred Experience in repairing and maintaining golf course equipment Strong knowledge of engine mechanics, hydraulics, and electrical systems Ability to troubleshoot and diagnose equipment issues Attention to detail and strong organizational skills Excellent communication and teamwork abilities Ability to work independently and prioritize tasks effectively Knowledge of safety protocols and regulations for equipment maintenance Do other task as requested by Superintendent and Management     Compensation Will be Dependent upon experience. 

By Camden Country Club, Yesterday at 06:15 PM - updated Yesterday at 06:16 PM - Camden, South Carolina

Develops and performs preventative maintenance program on all golf course maintenance equipment.      Diagnose and repair mechanical problems with all equipment.      Communicates the needs of maintenance and repair of all equipment to the superintendent.      Overhaul and be able to repair diesel and gas engines, transmissions, hydraulics, and electrical.      Operate shop equipment such as equipment lift, grinding tools, air compression tools, and welding.      Understand technical literature regarding equipment maintenance and repair.      Accountable for the repair and sharpening of all reel and rotary equipment at the discretion of the superintendent.      Must be able to manage and handle oils, grease, and other chemical compounds within the shop area.      Responsible for ordering/receiving parts, tracking inventory, maintaining equipment repair records.      Trains staff on the safe and proper use of equipment.      Maintain a safe, organized, and clean shop work area.      Prioritizes safety and addresses hazard concerns.      Recommends equipment purchases and leases.      Operates heavy and light equipment.      Duties, responsibilities and activities may change at any time with or without notice.   

By Randalls Island Park Alliance, Saturday at 10:44 AM - New York, New York

Title: Fleet and Equipment Specialist ( Mechanic ) Department: Operations  Job Type: Full-Time, Year-Round; 40 hours a week plus overtime and weekends/holidays, Non-Exempt  Benefits: Comprehensive benefits package 60 days following date of hire (health/dental/vision insurance, free life insurance, generous paid time off package, free parking on site, etc.) Pay Range: $35-37 per hour Work Location: Randall’s Island Park, New York City 10035   POSITION DESCRIPTION The Randall's Island Park Alliance is a 501(c)(3) organization and works with the City to maintain, sustain and program Randall's Island Park, including 60+ athletic fields. The Fleet and Equipment Specialist is responsible for the maintenance, repair and servicing of vehicles and equipment across all departments. This role will ensure that machinery operates safely and efficiently, contributing to the overall upkeep and functionality of the organization’s fleet operation. The Fleet and Equipment Specialist will work collaboratively with another Specialist on-site to ensure work is completed in an efficient manner and will communicate with department Directors and Managers regarding fleet and equipment updates. This role will report to the Chief of Operations.    MAJOR RESPONSIBILITIES • Conduct regular inspections and preventative maintenance on park vehicles, equipment and machinery organization-wide • Diagnose mechanical issues and perform necessary repairs in a timely manner • Troubleshoot equipment and fleet malfunctions • Flag repairs and issues with the fleet and equipment that may need to be outsourced  • Communicate updates regarding equipment and vehicles to management, both verbally and systematically • Keep management up to date regarding orders that have been placed and the status of equipment/vehicle requests • Maintain records of maintenance and repair work performed  • Utilize the Maintain X work order system to keep tasks organized and management up to date • Ensure equipment and fleet are well maintained and comply with safety standards • Collaborate with Chief of Operations to prioritize repairs and maintenance tasks • Perform other general tasks and assist with other projects at the Park, as assigned by the Chief of Operations.   This job description is not an exclusive or exhaustive list of all job functions that an employee in this position may be asked to perform from time to time.   QUALIFICATION REQUIREMENTS  • 5+ years of mechanical experience, involving vehicles, equipment, machinery and tools • Strong working knowledge of electric vehicles and equipment • Ability to multitask and work on multiple projects • Ability to work collaboratively, and create positive working relationships across the organization • Ability to communicate thoroughly and effectively with team members across the organization • Ability to shift priorities and focus, when needed • Ability to perform physical labor; must be able to lift up to 50 lbs. • Willing to work outdoors, in all types of weather, under strenuous conditions.  • Motivated and punctual, able to work both independently and as part of a team • Flexibility to work overtime and weekends • Familiarity with athletic fields, green spaces and parks • Valid Driver License  

By Chateau Golf and Country Club, Thursday at 04:36 PM - Kenner, Louisiana

Chateau Golf and Country Club is seeking a mechanically inclined individual to join our team as an Assistant Equipment Technician. Previous golf course experience is not required. We are looking for someone eager to learn and grow in the turf equipment maintenance industry. Job Description: Be trained to grind reels, sharpen blades, set cutting heights, and perform preventive maintenance Assist in larger equipment repairs and diagnostics under the guidance of the Equipment Manager Help maintain a clean, organized, and safe work environment Support the overall maintenance of golf course equipment, including mowers, utility vehicles, and small engines Be available to work occasionally on weekends and during golf outings as needed

By freestone club, Wednesday at 04:35 PM - updated Wednesday at 04:36 PM - fairfiled, Texas

  Location: Freestone Lake and Golf Fairfield, TX Status: Full-Time, Pay Rate: $22 to $35 DOE Supervisory Role: no Reports To: Equipment manager About Us: Freestone is a luxury lake and golf club encompassing the largest privately owned lake in the United States. Set upon 5,000 acres of open water, rolling hills and Savannah Post Oaks, Freestone provides a generational retreat for family and friends halfway between Dallas and Houston. The breathtaking property provides water-front golf at a championship level, trophy bass fishing, boating without public access, and all of the activities and amenities a family should expect from a world-class, private resort. Position Summary: We are looking for a seasoned Equipment Technician with a proven record of assisting the company in providing premium turf conditions. The candidate must have a strong background in maintaining golf equipment and maintenance programs, welding, fabricating.  This position is an integral part of the Agronomy Team and requires knowledge of a variety of golf, Ag and light construction equipment, exceptional organizational skills, ability to provide creative solutions, and ability to prepare or recommend the equipment and maintenance budget.     Qualifications:   -            Multi course experience -            2-5 years of experience as a head mechanic or Equipment Technician -        Working knowledge of all turf and landscape equipment, including cutting unit set-up, hydraulic theory and diagnosis, electrical theory and diagnosis, combustion engines, welding, 2 and 4 stroke engines -            Experience or familiarity on a variety of equipment -            Ability to fabricate parts, including cutting and welding -            Ability to read and follow manuals to understand preventive maintenance requirements and schedules and repair equipment -            Know and can utilize the various trade tools and the safety guidelines of their use -            Have a basic understanding of the game of golf and the effects turf equipment has on the overall condition and playability of the game -            Trade school or formal education or certifications in mechanical or electrical or related programs or equivalent experience -            Ability to lift and move heavy objects -            Have a valid driver’s license   Physical Demands: Ability to work when required during the day, nights, weekends, and holidays Walking, standing, sitting, heavy lifting, moving heavy objects Indoor and outdoor conditions Essential Functions Work at multiple equipment maintenance shops  preventive maintenance program of equipment maintains accurate record keeping Performs or assist parts fabrication Must work well with others as a team and help co-workers when needed Performs daily course checks to ensure cut quality and proper operation of equipment Places safety as a top priority and is responsible for complying with safety regulations and maintaining clean, functional service areas Strong problem-solving abilities and attention to detail Email resume to equipment manager Davidm@freestonetx.com

By Veseys Seeds and Equipment, July 7 - York, Prince Edward Island

Job Description Mechanic/Technician Veseys Equipment is a proud division of Veseys Seeds Ltd., a locally owned and operated business established in 1939, employing over 75 staff members. Serving all four Atlantic Canadian provinces, Veseys Equipment is a trusted leader in golf, municipal, and commercial grounds maintenance equipment. On Prince Edward Island, we also offer respected residential and landscaping equipment brands, alongside a range of tractor products. We’re celebrating our 29th season as Atlantic Canada’s exclusive Club Car distributor, with hundreds of successful fleet installations and units sold annually. As the #1 distributor of golf cars and turf equipment in Atlantic Canada, and a long-standing partner of Toro commercial equipment since 2007, Veseys Equipment is committed to delivering top-quality products and exceptional service. Position Overview We seek a qualified Mechanic/Technician with proven skills in mechanical and electrical systems, diagnostics, and equipment maintenance. This is a hands-on, team-based role where your expertise will ensure our wide range of machinery remains in peak condition, directly contributing to customer satisfaction. What We Offer · $2,000 Signing Bonus · - $1,000 paid upon signing · - $1,000 after 6 months of continuous employment · Supportive, team-oriented work culture · Opportunity to grow with Atlantic Canada’s leading equipment distributor · Work with respected brands and innovative technologies Key Responsibilities · Diagnose mechanical and electrical issues using appropriate tools and techniques · Perform maintenance and repairs on a range of commercial and residential equipment · Use power and hand tools effectively and safely · Maintain accurate service records (time, parts, work performed) · Collaborate with sales and parts staff to ensure timely service · Uphold safety standards and maintain a clean, organized work area · Support training and mentoring of junior technicians or apprentices as required Qualifications & Skills · Previous experience as a Mechanic or equivalent technical role preferred · Strong mechanical aptitude with the ability to read and follow technical manuals and schematics · Skilled in diagnostics and troubleshooting · Proficient in power and hand tools · Excellent attention to detail and problem-solving ability · Strong communication and teamwork skills · Red Seal certification is considered a strong asset · Commitment to workplace safety and professionalism Apply Today! Join a company where your skills are valued and your growth is supported. We'd love to hear from you if you're ready to take the next step in your mechanical career! Job Type: Full-time Pay: $25.00-$30.00 per hour Expected hours: 30 – 40 per week Benefits: Company events Dental care Extended health care Flexible schedule On-site parking Paid time off Store discount Vision care Schedule: 8-hour shift Day shift Monday to Friday Overtime Weekends as needed   Work Location: In person/York, PE  

By MTE Equipment Solutions, Inc, June 16 - updated June 30 - Providence, Rhode Island

South Shore MA and RI On The Road Service Technician MTE Equipment Solutions, Inc. is seeking a motivated individual to join our team as an on the road service mechanic covering the areas of Central/Eastern Massachusetts/Rhode Island. We are a growing equipment dealer representing high quality brands throughout the northeast to commercial, municipal and industrial customers.   The primary purpose of this job is to provide onsite service of equipment sold by MTE. Equipment includes loaders, tractors, industrial mowers and more.   The individual who takes this job must be a highly skilled equipment mechanic, capable of working on hydraulic, diesel and electrical systems in the field when necessary.   You will be provided with a stocked vehicle, laptop, expense card and factory specific tools. In this position you will take the company vehicle home with you every day. Each day will start from your home. You will set your own schedule working in conjunction with our local branch to ensure all customer needs are met in a timely and professional manner.   You will deal directly with customers on site. However, billing and bill collection will be handled by the company and is not the responsibility of the mechanic.   Experience Requirements: -10 years or more of general mechanical experience -5 years or more diesel engine experience -Hydraulic/electrical repair experience -Ability to read hydraulic/electrical Schematics is a must. -Some certifications preferred but not required   Special Requirements: -Must be physically fit enough to handle the demands of the job. -Must be able to lift 50 lbs or more from the ground -You must have a valid driver’s License   Job Type: Full-time Pay: $70,000.00 - $90,000.00 per year       Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Parental leave Professional development assistance Retirement plan Vision insurance Schedule: 8 hour shift Day shift Monday to Friday Overtime Ability to Commute: Westborough, MA 01581 (Preferred) Ability to Relocate: Westborough, MA 01581: Relocate before starting work (Preferred) Willingness to travel: 50% (Preferred) Work Location: In person   Please forward your resume to the Service Manager in Derry, NH: Josh Daignault Email: jdaignault@mte.us.com

By Wesco Turf, Inc, June 30 - Sarasota, Florida

What Will You Do? The Mobile Service Technician is responsible for providing onsite customer service, equipment repairs, vendor led reworks, off lease inspections (OLI), support new equipment inspections for all Commercial and SF&G accounts. Territory of coverage is from, but not limited to, Sarasota to Brooksville.  To grow and build a successful career with Wesco Turf, you will be responsible for: Weekly itinerary can include, but not limited to, the following: Customer onsite warranty and customer bill repairs Service contract execution and administration New prospect discovery for service offerings Meet or exceed monthly and yearly labor and parts budgets Commercial & SF&G equipment delivery inspections When necessary, delivery  events Off Lease inspections (OLI) Attend and assist demos  when requested by sales teams Onsite customer training Vendor reworks Prepare and submit weekly Activity Reports Safely operate company vehicle Toro Web Training - required monthly training for technicians and service advisors Complete monthly truck parts inventory count  Wesco U - training seminars for customers Calls to customer to provide but not limited to: General technical information Technician and operator training Billable diagnostic and repairs Convey benefits of Wesco Turf, Inc.  Provide support for parts marketing  Perform on site, end of lease inspections (OLI) of equipment  Perform demonstrations with territory manager for customers when requested Who Are We? Since 1987, Wesco Turf has been the golf, grounds, and irrigation market leader. We are a worldwide provider of the highest quality used golf course equipment. We are an exclusive provider for Toro, Club Car, Bernhard, Salsco, Harper, Ventrac, and MCI-Flowtronex and Watertronics Pump Stations in Florida and Southern Georgia. Wesco has been honored multiple times as Toro’s North American Distributor of Excellence. On August 1st, 2022, Wesco acquired Hector Turf located in Deerfield Beach expanding our market to include from Vero Beach to Key West, including the Bahamas, Puerto Rico, Dominican Republic, and the Caribbean Islands. What Can We Give You? Wesco’s foundation is built on the strength and quality of our people. We are committed to providing all of the resources and tools necessary to help our people be successful. Recognizing that our employees are our greatest resource, our competitive rewards package is designed to attract and retain our talented associates.  Health Insurance – Medical, dental, and vision insurance is available to full-time employees, eligible dependents, and spouses.  Wellness – We offer full-time associates a variety of mental health, financial health, and other types of resources. Growth Opportunities – Nearly half of our employees have worked in our organization for over ten years. We are committed to the advancement of our employees by providing challenging work assignments, formal and informal training, professional associations, and networking opportunities. Competitive Salary – In addition to their base pay, employees are eligible for our company-wide bonus that is dependent on Wesco meeting our sales goals. We have met these goals every year for the past 10 years, the bonus is equivalent to 0-3 weeks of additional pay and is prorated for your first year. Employees in our Service and Operations departments are eligible for a monthly incentive program based on performance.  

By Wesco Turf, Inc, June 30 - Sarasota, Florida

What Will You Do? The Turf Equipment Mechanic is responsible for providing support to the Sarasota Shop team to ensure the shop can respond to our customer's needs, exceeding their expectations for quality repairs, quick turnaround time, and meeting promise dates. To grow and build a successful career with Wesco Turf, you will be responsible for: Accurately test, troubleshoot, and diagnose failures on hydraulic, electrical systems, and gasoline and diesel engines. Perform all repairs to meet quality control standards and in accordance with SRT. Prepare accurate estimates for parts & labor. Read and interpret electrical and hydraulic schematics. Welding as needed Assembly of new equipment to customer specs and within SST Preparation of Demo, Loaner, Pre-owned sale and rental units according to request and specifications Who Are We? Since 1987, Wesco Turf has been the golf, grounds, and irrigation market leader. We are a worldwide provider of the highest quality used golf course equipment. We are an exclusive provider for Toro, Club Car, Bernhard, Salsco, Harper, Ventrac, and MCI-Flowtronex and Watertronics Pump Stations in Florida and Southern Georgia. Wesco has been honored multiple times as Toro’s North American Distributor of Excellence. On August 1st, 2022, Wesco acquired Hector Turf located in Deerfield Beach expanding our market to include from Vero Beach to Key West, including the Bahamas, Puerto Rico, Dominican Republic, and the Caribbean Islands. What Can We Give You? Wesco’s foundation is built on the strength and quality of our people. We are committed to providing all of the resources and tools necessary to help our people be successful. Recognizing that our employees are our greatest resource, our competitive rewards package is designed to attract and retain our talented associates.  Health Insurance – Medical, dental, and vision insurance is available to full-time employees, eligible dependents, and spouses.  Wellness – We offer full-time associates a variety of mental health, financial health, and other types of resources. Growth Opportunities – Nearly half of our employees have worked in our organization for over ten years. We are committed to the advancement of our employees by providing challenging work assignments, formal and informal training, professional associations, and networking opportunities. Competitive Salary – In addition to their base pay, employees are eligible for our company-wide bonus that is dependent on Wesco meeting our sales goals. We have met these goals every year for the past 10 years, the bonus is equivalent to 0-3 weeks of additional pay and is prorated for your first year. Employees in our Service and Operations departments are eligible for a monthly incentive program based on performance. 

By Seamus Weldon, June 27 - updated June 27 - Killarney, Co. Kerry

Ireland calling !!😁   Do you want to become part of the Seamus Weldon  Main John Deere Golf & Turf Team? Do you have what it takes to become one of our a Service Technician within our growing business? We are looking for a dedicated self-motivated person to work within our busy workshop. Do you possess excellent communication, literacy and numeracy skills and believe in always delivering a first class service then this could be the position for you. The role will involve using computer systems for looking up parts and diagnose faults with John Deere Service Advisor, so a high level of IT literacy is essential. It would be advantageous to have a basic knowledge of machinery, however, training will be given.. In return we can offer you an excellent rate of pay, up to 20 days holiday, a personal development plan and the opportunity to become part of the team

By Country Club Tour, June 26 - updated June 26 - Sturgeon County, Alberta

Country Club Tour Golf Group in Edmonton, Alberta, is seeking a reliable and skilled Golf Course Mechanic to join our dedicated team. The successful candidate will be responsible for maintaining and repairing golf course equipment, ensuring that the equipment is safe, reliable, and ready for daily use. This role involves working closely with the Superintendent to ensure minimal downtime and efficient equipment operation.

By Westhaven Golf Club, June 25 - updated June 25 - Franklin, Tennessee

Westhaven Golf Club is seeking a coachable, mechanically inclined individual to join our team as an Assistant Equipment Technician. Previous golf course experience is not required—we’re looking for someone eager to learn and grow in the turf equipment maintenance industry. What You’ll Do: Be trained to grind reels, set cutting heights, and perform preventive maintenance (PMs) Assist in larger equipment repairs and diagnostics under the guidance of our Head Equipment Technician Help maintain a clean, organized, and safe work environment Support the overall maintenance of golf course equipment, including mowers, utility vehicles, and small engines What We’re Looking For: A mechanically minded individual who enjoys working with their hands A team player who is reliable, detail-oriented, and open to learning Someone with basic tool knowledge and a desire to build a career in equipment maintenance A valid driver’s license Why Westhaven? On-the-job training with a focus on skill development Support for continued education and industry certifications Opportunity to work at a top-tier private club alongside experienced professionals Positive, team-focused work environment This is a hands-on position with room for growth in the turf equipment industry. If you're ready to learn and grow your mechanical skills in a dynamic golf course setting, we'd love to hear from you. About Westhaven Golf Club Westhaven Golf Club is an 18-hole private facility located in the heart of Franklin, Tennessee. Established in 2007, the course was thoughtfully designed by renowned golf course architect Arthur Hills to blend seamlessly with the natural landscape. Our club is committed to providing exceptional playing conditions and a welcoming environment for members and guests alike. With a strong focus on turf excellence, team development, and community, Westhaven offers a rewarding workplace in a dynamic and growing club setting. To apply, please send a resume or short summary of your experience to Golf Course Superintendent Kevin Noble kevin.noble@southernland.com

By Cress Creek Country Club, June 25 - Naperville, Illinois

Reports To: Golf Course Superintendent   Overview: Cress Creek Country Club is seeking a dedicated and experienced Equipment Manager, to oversee the efficient and effective operation of all turf maintenance equipment at the golf course. The ideal candidate is responsible for overseeing the maintenance, repair, and inventory management of the golf course machinery, ensuring that all equipment is in optimal working condition to support the groundskeeping team in providing a high-quality playing surface.

By MTE Equipment Solutions, Inc, June 24 - Cohoes, New York

Albany On The Road Service Technician MTE Equipment Solutions, Inc. is seeking a motivated individual to join our team as an on the road service mechanic covering the areas of Eastern New York, Vermont, and Western Mass. We are a growing equipment dealer representing high quality brands throughout the northeast to commercial, municipal and industrial customers.   The primary purpose of this job is to provide on site service of equipment sold by MTE. Equipment includes loaders, tractors, industrial mowers and more. The individual who takes this job must be a highly skilled equipment mechanic, capable of working on hydraulic, diesel and electrical systems in the field when necessary.   You will be provided a stocked vehicle, lap top, expense card and factory specific tools. In this position you will take the company vehicle home with you every day. Each day will start from your home. You will set your own schedule working in conjunction with our local branch to ensure all customer needs are met in a timely and professional manner.   You will deal directly with customers on site. However, billing and bill collection will be handled by company and is not the responsibility of the mechanic.   Experience Requirements: -5 years or more general mechanical experience -5 years or more diesel engine experience -Hydraulic/electrical repair experience -Ability to read hydraulic/electrical Schematics is a must. -Some certifications preferred but not required   Special Requirements: -Must be physically fit enough to handle the demands of the job. -Must be able to lift 50 lbs or more from the ground -You must have a valid drivers License -Pay is negotiable based on experience Job Type: Full-time Pay: From $65,000.00 per year   Benefits: 401(k) 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Parental leave Professional development assistance Retirement plan Vision insurance   Schedule: 8 hour shift Day shift Monday to Friday Overtime   Work Location: In person

By Little Mountain Country Club, June 24 - painesville, Ohio

Position Summary: Little Mountain Country Club is seeking a skilled and detail-oriented Mechanic/Technician to join our team. This role involves inspecting, diagnosing, and repairing a variety of turf and landscape equipment to ensure they operate at peak performance. The ideal candidate will have experience with small gas and diesel engines, hydraulic and electrical systems, and turf maintenance equipment. Key Responsibilities: • Perform intake of all new equipment, documenting mechanical and cosmetic issues needing repair. • Accurately test, troubleshoot, and diagnose failures in hydraulic, electrical systems, and gasoline and diesel engines. • Read and interpret electrical and hydraulic schematics. • Prepare parts lists for equipment needing repairs. • Install necessary parts, check fluid levels, test, and ensure proper operation. • Operate and test equipment to confirm that quality standards are met before returning it to service. • Perform reel and bedknife setup, adjustments, grinding, and general overhauls of motors and reels. • Install and adjust braking systems. • Maintain overall shop cleanliness and organization. Experience Requirements: Preferred experience in: • Turf and landscape equipment maintenance. • Small gas and diesel engine repair. • Hydraulic systems: diagnosis and repair. • Electrical systems: diagnosis and repair. • Bearing assemblies. • Reel and bedknife setup, adjustments, and grinding. • General troubleshooting skills. Position Details: Report Directly to Superintendent. • Start Date: ASAP • Salary: $30 per hour. • Location: Little Mountain Country Club.   If you are interested in this opportunity, please respond to this listing with your resume and any inquiries you may have. We look forward to hearing from you! Join our team and help us maintain the quality and performance of our equipment at Little Mountain Country Club!

By freestone Lake and Golf, June 20 - fairfiled, Texas

Location: Freestone Lake and Golf Fairfield, TX Status: Full-Time, Pay Rate: $25 to $35 DOE Supervisory Role: no Reports To: Equipment manager About Us: Freestone is a luxury lake and golf club encompassing the largest privately owned lake in the United States. Set upon 5,000 acres of open water, rolling hills and Savannah Post Oaks, Freestone provides a generational retreat for family and friends halfway between Dallas and Houston. The breathtaking property provides water-front golf at a championship level, trophy bass fishing, boating without public access, and all of the activities and amenities a family should expect from a world-class, private resort. Position Summary: We are looking for a seasoned Equipment Technician with a proven record of assisting the company in providing premium turf conditions. The candidate must have a strong background in maintaining golf equipment and maintenance programs, welding, fabricating.  This position is an integral part of the Agronomy Team and requires knowledge of a variety of golf, Ag and light construction equipment, exceptional organizational skills, ability to provide creative solutions, and ability to prepare or recommend the equipment and maintenance budget.     Qualifications:   -            Multi course experience -            1-5 years of experience as a head mechanic or Equipment Technician -        Working knowledge of all turf and landscape equipment, including cutting unit set-up, hydraulic theory and diagnosis, electrical theory and diagnosis, combustion engines, welding, 2 and 4 stroke engines -            Experience or familiarity on a variety of equipment -            Ability to fabricate parts, including cutting and welding -            Ability to read and follow manuals to understand preventive maintenance requirements and schedules and repair equipment -            Know and can utilize the various trade tools and the safety guidelines of their use -            Have a basic understanding of the game of golf and the effects turf equipment has on the overall condition and playability of the game -            Trade school or formal education or certifications in mechanical or electrical or related programs or equivalent experience -            Ability to lift and move heavy objects -            Have a valid driver’s license   Physical Demands: Ability to work when required during the day, nights, weekends, and holidays Walking, standing, sitting, heavy lifting, moving heavy objects Indoor and outdoor conditions Essential Functions Work at multiple equipment maintenance shops  preventive maintenance program of equipment maintains accurate record keeping Performs or assist parts fabrication Must work well with others as a team and help co-workers when needed Performs daily course checks to ensure cut quality and proper operation of equipment Places safety as a top priority and is responsible for complying with safety regulations and maintaining clean, functional service areas Strong problem-solving abilities and attention to detail Email resume to equipment manager davidm@freestonetx.com

By Shannopin Country Club, June 19 - Pittsburgh, Pennsylvania

We are looking for a full time Turf Equipment Technician for the Ground's department at Shannopin Country Club located fifteen minutes north of the city of Pittsburgh. We are looking for a highly motivated detail-oriented individual. The Equipment technician will report to the Golf Course Superintendent and will be responsible for the entire Ground's Equipment Fleet. Our fleet includes a range of brands including Toro, John Deere, Wiedenman, Jacobsen, Ventrac, etc. We are looking for someone who can maintain basic equipment upkeep including grinding reels, checking mower heights, oil changes, checking brakes, etc. The individual will also be responsible for repairing any equipment break downs the fleet experiences. We are looking for someone with great communication skills who can proactively convey equipment and part needs to the Superintendent. We possess an equipment lift, Bernhard Reel Grinder and Bed Knife Grinder, and all tools necessary to upkeep equipment and complete repairs. 

By Oliphant Golf Management, June 18 - TOLEDO, Ohio

Golf Course Mechanic City of Toledo Golf Courses Facility: Ottawa Park, Detwiler Park and Collins Park Golf Courses Summary: Oliphant Golf Management is seeking an experienced and motivated golf course mechanic to oversee the maintenance and repair of golf course equipment at Ottawa Park, Detwiler Park and Collins Park golf courses in Toledo OH.   The mechanic reports to the golf course superintendent and oversees a comprehensive preventive maintenance program. This position includes the repair of failing equipment, record keeping,. and placing orders for parts and supplies.   Skills, expertise and traits: ●        Experience with diesel and gas engines, basic knowledge of hydraulics, ability to set and grind reels ●        Ability to perform heavy work, push/pull up to 100 lbs of force occasionally and 50 lbs frequently ●        Ability to lift up to 50 lbs. ●        Ability to work at a fast pace   .Responsibilities: ●        Inspects, diagnoses and repairs mechanical defects/failures in various golf course maintenance equipment including, diesel- and gasoline-powered tractors, trenchers, sweepers, rollers, mowers, and other mechanical equipment used in utility work and golf carts. ●        Instructs and/or trains golf course maintenance workers regarding preventive maintenance, and the proper cleaning of and safe operation of equipment. ●        Prioritizes equipment repair and maintenance work. ●        Maintains a preventive maintenance program within budget on all equipment, and purchases repair parts and replacement supplies. ●        Keeps a complete set of records for equipment and parts inventory purchases, equipment conditions, costs of repairs and preventive maintenance for all equipment. ●        Spot checks equipment for performance on the course, frequently makes emergency repairs to equipment on the course, and services or supervises servicing of equipment prior to use. ●        Oversees the shop area maintenance. ●        Operates equipment ie mowing, rolling, leaf removal on golf course ●        Regulates employees' use of equipment in the absence of the superintendent, if needed, and performs other duties as directed by the superintendent. Compensation:   ●       $22-$26/hour DOE ●       Company health Insurance; per company policy, 70/30 employer/employee split individual, 60 day wait period ●       401k Retirement account – per company policy, 4% match, 1 year wait period ●       Vacation days: five (10 initial starting days) ●       Golf privileges at Toledo City Golf Courses and OGM managed Courses   Oliphant Golf is an Equal Opportunity Employer. This means we treat all employees and applicants fairly, legally, and consistently. We will not discriminate, nor allow any employee to discriminate against a job applicant or employee because of national origin, race, ancestry, color, religious beliefs, sexual orientation, sexual identity, marital status, sex, age, citizenship, veteran status, pregnancy, disability, genetic information, or any other legally protected status by federal, state, or local law, or ordinance, or regulation.   Please submit resumes to: Ken Lacy klacy@oliphantcompanies.com    

By Hamlet Golf & Country Club, June 18 - Commack, New York

 The Hamlet is an 18 hole private country club located in Commack NY.  Equipment tech oversees all maintenance and repair of golf course equipment. Responsible for shop organization and preventative maintenance

By Baltimore Municipal Golf Corporation, June 13 - updated June 13 - BALTIMORE, Maryland

The Mechanic is responsible for ensuring the continuous operation of all mechanical equipment or devices used on the golf course. This role is tasked with diagnosing, inspecting, maintaining, and repairing the various mechanical pieces of the Baltimore Municipal Golf Corporation (BMGC) autos, trucks, mowers, and utility vehicles. Essential Functions • Routinely inspect and maintain assigned equipment. • Effectively diagnose defects and perform repairs. • Set and adjust mower reels. • Disassemble and overhaul engines to return to operation. • Perform maintenance and repair on various assemblies including: transmissions, differentials, carburetors, fuel pumps, steering systems, starters, universal joints, hydraulic systems, high pressure sprayers, etc. • Regularly install and adjust brakes, install batteries, tire, wiring, and glass. • Efficiently perform welding, painting, and body and fender work. • Maintain accurate records of repairs, parts used, and time worked. • Perform emergency repairs when needed. Skills/Abilities • Mechanical aptitude • Problem solving ability • Positive attitude • Excellent customer service skills

By Freestone Lake and Golf, June 9 - updated June 12 - Fairfield, Texas

Freestone is a luxury lake and golf club encompassing the largest privately owned lake in the United States. Set upon 5,000 acres of open water, rolling hills and Savannah Post Oaks, Freestone provides a generational retreat for family and friends halfway between Dallas and Houston. The breathtaking property provides water-front golf at a championship level, trophy bass fishing, boating without public access, and all of the activities and amenities a family should expect from a world-class, private resort. Position Summary: We are looking for a seasoned Equipment Technician with a proven record of assisting the company in providing premium turf conditions. The candidate must have a strong background in maintaining golf equipment and maintenance programs, welding, fabricating.  This position is an integral part of the Agronomy Team and requires knowledge of a variety of golf, Ag and light construction equipment, exceptional organizational skills, ability to provide creative solutions, and ability to prepare or recommend the equipment and maintenance budget. Essential Functions Work at multiple equipment maintenance shops  preventive maintenance program of equipment maintains accurate record keeping Performs or assist parts fabrication Must work well with others as a team and help co-workers when needed Performs daily course checks to ensure cut quality and proper operation of equipment Places safety as a top priority and is responsible for complying with safety regulations and maintaining clean, functional service areas Strong problem-solving abilities and attention to detail

By Coldstream Country Club, June 11 - updated June 11 - Cincinnati, Ohio

Coldstream Country Club is a 1959 Dick Wilson design located in Anderson Township just 15 minutes east of downtown Cincinnati. In total the property is just shy of 200 Acres and includes a 14 Acre range with a heated indoor practice facility. Keith Foster lead the course renovation in 2020 which included regrassing of all surfaces except greens. Bunkers were renovated using the Better Billy Bunker system and natural areas have been established as well. XGD drainage system was installed on greens in 2022 along with over 16,000 lineal feet of drainage installed in fairways and approaches.   The Equipment Technician reports to the Golf Course Superintendent and oversees a comprehensive preventive maintenance program for all golf course equipment and assets. Responsibilities include diagnosing and repairing equipment, maintaining records of parts and labor, and managing orders for parts and supplies. The Equipment Manager will communicate equipment maintenance and repair needs to the Superintendent and Senior Assistant, and schedule and direct the work to be completed. Safety is a top priority, and the Equipment Manager is responsible for maintaining a clean and organized maintenance facility. The club is actively updating the equipment fleet through capital leases and is looking to continue to improve the entire maintenance operation year over year.

By Heritage Golf Group - Lakewood Ranch Golf and Country Club, June 11 - Lakewood Ranch, Florida

Lakewood Ranch Golf and Country Club, one of Florida’s premier private club communities, is seeking a Head Mechanic to join our Golf Course Maintenance team. This is an exciting opportunity to work in a dynamic, team-oriented environment maintaining championship-level golf courses and state-of-the-art equipment. Key Responsibilities: Oversee the maintenance and repair of all golf course equipment, including mowers, tractors, utility vehicles, and small engine equipment,  Repair and provide all required preventive maintenance on all equipment associated with Course Maintenance Department. Diagnose mechanical issues and perform repairs in a timely and cost-effective manner Maintain accurate records of preventative maintenance and repairs Manage parts inventory, shop supplies, and ensure the maintenance facility is clean, safe, and organized Train and supervise assistant mechanics and equipment operators on proper equipment use and care Coordinate with Golf Course Superintendents to ensure equipment readiness and performance Able to repair and maintain all golf course equipment.

By Shannopin Country Club, June 4 - Pittsburgh, Pennsylvania

We are looking for a part-time/seasonal mechanic. Hours are flexible. Job operations would include reel grinding, mower blade sharpening, mower height maintenance, oil changes, break tightening, and general mechanical upkeep.